ligitek electronics co.,ltd. property of ligitek only data sheet lur9553h/tr1 surface mount led tape and reel doc. no : qw0905-lur 9553h/tr1 rev. : a date : 09 - jun - 2005
ligitek electronics co.,ltd. property of ligitek only 1.85 page 1/7 1.85 - 0.9 2.8 2.2 0.23 4.0 1.55 4.06 2.24 3.12 9.3 2.0 12.00.3 0.95 + 0.9 1.75 polarity 5.5 carrier type dimensions note : 1.all dimension are in millimeter tolerance is ? 0.2mm unless otherwise noted. 2.specifications are subject to change without notice. package dimensions part no. lur9553h/tr1 3.5 3.2 4.0 note : the tolerances unless mentioned is ? 0.2mm,angle ? 0.5. unit=mm.
page 2/7 74.0 ? 1.5 16.0 ? 1.0 reel dimensions part no. lur9553h/tr1 14.2 ? 1.0 ligitek electronics co.,ltd. property of ligitek only 1500 devices quantity/reel 12.0mm tape,7"reel lur9553h/tr1 part no. description r 178 ? 2.0
ligitek electronics co.,ltd. property of ligitek only unit ur(h) symbol absolute maximum ratings page 3/7 parameter absolute maximum ratings at ta=25 j part no. lur9553h/tr1 ma ma 50 100 v g a 2000 10 mw 130 i f i fp ir esd pd j j tstg t opr tsol -40 ~ +100 max 260 j for 5 sec max -40 ~ +85 forward current power dissipation reverse current @5v operating temperature storage temperature electrostatic discharge peak forward current duty 1/10@10khz soldering temperature typ. max. min. min. 120 550 2.6 1.7 300 color lens emitted 630 r ed water clear 20 spectral halfwidth ??f nm dominant wave length f dnm forward voltage @20ma(v) viewing angle 2 c 1/2 (deg) luminous intensity @20ma(mcd) part no algainp/gap lur9553h/tr1 typical electrical & optical characteristics (ta=25 j ) material note : 1.the forward voltage data did not including ? 0.1v testing tolerance. 2. the luminous intensity data did not including ? 15% testing tolerance.
fig.4 relative intensity vs. temperature 3.0 2.5 2.0 1.5 0.5 1.0 0.0 1.0 relative intensity@20ma wavelength (nm) 550 0.0 0.5 600 650 700 fig.3 forward voltage vs. temperature 0 fig.5 relative intensity vs. wavelength ambient temperature( j ) forward voltage@20ma normalize @25 j -40 0.8 -20 1.0 0.9 1.1 1.2 relative intensity@20ma normalize @25 j 80 40 20 60 100 ambient temperature( j ) -20 -40 20 060 40 80 100 3.0 2.0 1.0 1.5 2.5 fig.2 relative intensity vs. forward current typical electro-optical characteristics curve 0.5 0.0 ligitek electronics co.,ltd. property of ligitek only fig.1 forward current vs. forward voltage forward voltage(v) forward current(ma) 1.0 0 1 1.5 10 1 100 ur(h) chip 1000 relative intensity normalize @20ma 2.0 2.5 3.0 4/7 page forward current(ma) 1 10 100 1000 3.5 30 x 0 x -30 x 100% 50% 25% 75% 25% 0 75% 50% 60 x 100% -60 x part no. lur9553h/tr1
ligitek electronics co.,ltd. property of ligitek only page 5/7 245 ? 5 j within 5 sec soldering heat max. 260 j soldering heat 120 ~ 150 j 120 ~ 180 sec preheat soldering iron: basic spec is ?? 5 sec when 260 j. if temperature is higher, time s hould be shorter(+10 j ? -1sec). power dissipation of iron should be smaller than 15w, and temperature should be controllable. surface temperature of the device should be under 230 j . part no. lur9553h/tr1 220 temp. ( j ) reflow temp/time 120 150 preheat rising +5 j /sec cooling -5 j /sec 60 ~ 120 sec 5sec time
ligitek electronics co.,ltd. property of ligitek only page 6/7 circuit model b led part no. lur9553h/tr1 circuit model a led precautions for use: storage time: 1.the operation of temperatures and rh are : 5 j ~35 j ,rh60%. 2.once the package is opened, the products s hould be used within a week. otherwise, they should be kept in a damp proof box with descanting agent. considering the tape life, we suggest our customers to use our pr oducts within a year(from production date). 3.if opened more than one week in an atmos phere 5 j ~ 35 j ,rh60%, they should be treated at 60 j? 5 j fo r 15hrs. cleaning: use alcohol-based cleaning solvents such as isopropyl alc ohol to clean the led. (a) recommended circuit. (b) the difference of brightness between led could be f ound due to the vf-if characteristics of led. esd(electrostatic discharge): static electricity or power surge will damage the led. use of a c onductive wrist band or anti-electrosatic glove is recommended when handing these led. all devices, equipment and machinery must be properly grounded. drive method: led is a current operated device, and therefore, require r some kind of current limiting incorporated into the driver circuit. this current limiting typically takes the form of a current limiting resistor placed in series with the led. consider worst case voltage variations than could occur across the current limiting resistor. the forwrd current should not be allowed to c hange by more than 40 % of its desired value.
reference standard mil-std-883d:1008 jis c 7021: b-10 mil-std-750d: 1026 mil-std-883d: 1005 jis c 7021: b-1 jis c 7021: b-12 mil-std-202f: 107d mil-std-750d: 1051 mil-std-883d: 1011 mil-std-202f:103b jis c 7021: b-11 test condition test item operating life test high temperature storage test 1.ta=under room temperature as per data sheet maximum rating. 2.if=20ma 3.t=1000 hrs (-24hrs, + 72hrs) 1.ta=105 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) low temperature storage test thermal shock test high temperature high humidity storage test 1.ta=65 j? 5 j 2.rh=90 %~95% 3.t=1000hrs ? 2hrs 1.ta=105 j? 5 j &-40 j? 5 j (10min) (10min) 2.total 10 cycles 1.ta=-40 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) classification endurance test solderability test temperature cycling 1.t.sol=235 j? 5 j 2.immersion time 2 ? 0.5sec 3.coverage ? 95% of the dipped surface 1.105 j ~ 25 j ~ - 55 j ~ 25 j 30mins 5mins 30mins 5mins 2.10 cyeles ir reflow ramp-up rate(183 j to peak) +3 j second max temp. maintain at 125( ? 25) j 120 seconds max temp. maintain above 183 j 60-150 seconds peak temperature range 235 j +5/-0 j time within 5 j of actual peak temperature(tp) 10-30 seconds ramp-down rate +6 j /second max environmental test mil-std-202f: 107d mil-std-750d: 1051 mil-std-883d: 1010 jis c 7021: a-4 mil-std-750d:2031.2 j-std-020 mil-std-202f: 208d mil-std-750d: 2026 mil-std-883d: 2003 iec 68 part 2-20 jis c 7021: a-2 page 7/7 reliability test: part no. lur9553h/tr1 ligitek electronics co.,ltd. property of ligitek only
|
